"Creating Practical Solutions for Life's Everyday Challenges"
Cut the zip tie with pliers or scissors and discard.
Separate the profiles to fit your hand in between them.
Make sure the tool sits snug to the edge of the table with the lip pressed against the outer edge.
For a permanent attachment to a workbench use counter setscrews (not included) drilled through the holes in the connection bar.
MyMiterGrip
Right Handed Cut:
With the smaller profile on the right, place your left hand in between the profiles and use a saw or other work tool with your right hand outside the assembly.
Left Handed Cut:
With the smaller profile on the left, place your right hand in between the profiles and use a saw or other work tool with your left hand outside the assembly.
Always wear gloves and eye protection!
Right Handed Miter Cut:
With the miter profile on the right, place your left hand in between the profiles and use a saw with your right hand with the blade placed inside the guides for 45. 22.5, or 90 degree cuts.
Left Handed Miter Cut:
With the miter profile on the left, place your right hand in between the profiles and use a saw with your left hand with the blade placed inside the guides for 45. 22.5, or 90 degree cuts.